5 m 12 mm Double Sided Acrylic Adhesive Tape for LED Strips 220 V up to 14 mm Transparent Heat Resistant Acrylic PET (5 m Long, 12 mm Wide, 1 mm Thick)

Acrylic double sided adhesive tape 12 mm wide; acrylic material, much stronger than normal double-sided tapes; designed to fix 220V LED strips that do not have adhesive behind, as it withstands heat very well, as normal strips with the heat of the strip end up peeling; adapts very well to slightly rough surfaces given its thickness (1 mm); ideal for wood, ceramic (tile. ), glass, metal, plastic, brick, stone and much more materials; it is 5 meters long. 12mm wide 1 mm thick; instructions for proper installation: clean and dry well both surfaces (ideally do it with alcohol or similar); there should be no dust, grease, or dirt in general; install the strip on one side, without peeling off the outer protector; press firmly throughout its travel; remove the outer protector and stick the object to be fastened, carefully and tightening firmly; pass all the pasted object firmly tightening for at least 10 seconds; wait up to 24h before hanging something heavy; for low weight LED strips can be lit from the first minute; important notes about acrylic strips: acrylic strips take several hours to achieve their maximum bonding power; during the first few minutes the bonding force is around 70%; after 24h is around 90-95%, and 100% is reached from 48h (Times may be shorter in dry and warm environments, and slightly higher in cold and wet); to the touch the strip seems not to stick much; This is normal and does not decrease its holding power; It is designed to stick things, not human skin; having a thickness of 1 mm it adapts well to surfaces that are not smooth at all, although it is not intended for very rough things (e.g. e)

• 12mm wide double sided adhesive tape
• Transparent acrylic type much stronger than normal ones
• Ideal for 220v LED strips. Withstands heat very well
• Length: 5 m, Width: 12 mm, Thickness: 1 mm
• Maximum support is obtained from 24h